目录
  • 1.base64编码的原因
  • 2.base64编码原理
  • 3.实现代码
  • 4.使用示例（结合opencv）
  • 5.效果图      
  • 6.方法补充

1.base64编码的原因

网络传送渠道并不支持所有的字节，例如传统的邮件只支持可见字符的传送，像ASCII码的控制字符就不能通过邮件传送。这样用途就受到了很大的限制，比如图片二进制流的每个字节不可能全部是可见字符，所以就传送不了。最好的方法就是在不改变传统协议的情 况下，做一种扩展方案来支持二进制文件的传送。把不可打印的字符也能用可打印字符来表示，问题就解决了。Base64编码应运而生，Base64就是一种 基于64个可打印字符来表示二进制数据的表示方法。

2.base64编码原理

Base64编码的思想是是采用64个基本的ASCII码字符对数据进行重新编码。它将需要编码的数据拆分成字节数组。以3个字节为一组。按顺序排列24 位数据，再把这24位数据分成4组，即每组6位。再在每组的的最高位前补两个0凑足一个字节。这样就把一个3字节为一组的数据重新编码成了4个字节。当所要编码的数据的字节数不是3的整倍数，也就是说在分组时最后一组不够3个字节。这时在最后一组填充1到2个0字节。

3.实现代码

ZBase64.h

#include string
using namespace std;
 
class ZBase64
{
public:
    /*编码
    DataByte
        [in]输入的数据长度,以字节为单位
    */
    string Encode(const unsigned char* Data,int DataByte);
    /*解码
    DataByte
        [in]输入的数据长度,以字节为单位
    OutByte
        [out]输出的数据长度,以字节为单位,请不要通过返回值计算
        输出数据的长度
    */
    string Decode(const char* Data,int DataByte,int& OutByte);
};

ZBase64.cpp

#include "ZBase64.h"
 
string ZBase64::Encode(const unsigned char* Data,int DataByte)
{
    //编码表
    const char EncodeTable[]="ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
    //返回值
    string strEncode;
    unsigned char Tmp[4]={0};
    int LineLength=0;
    for(int i=0;i<(int)(DataByte / 3);i++)
    {
        Tmp[1] = *Data++;
        Tmp[2] = *Data++;
        Tmp[3] = *Data++;
        strEncode+= EncodeTable[Tmp[1] >> 2];
        strEncode+= EncodeTable[((Tmp[1] << 4) | (Tmp[2] >> 4)) & 0x3F];
        strEncode+= EncodeTable[((Tmp[2] << 2) | (Tmp[3] >> 6)) & 0x3F];
        strEncode+= EncodeTable[Tmp[3] & 0x3F];
        if(LineLength+=4,LineLength==76) {strEncode+="\r\n";LineLength=0;}
    }
    //对剩余数据进行编码
    int Mod=DataByte % 3;
    if(Mod==1)
    {
        Tmp[1] = *Data++;
        strEncode+= EncodeTable[(Tmp[1] & 0xFC) >> 2];
        strEncode+= EncodeTable[((Tmp[1] & 0x03) << 4)];
        strEncode+= "==";
    }
    else if(Mod==2)
    {
        Tmp[1] = *Data++;
        Tmp[2] = *Data++;
        strEncode+= EncodeTable[(Tmp[1] & 0xFC) >> 2];
        strEncode+= EncodeTable[((Tmp[1] & 0x03) << 4) | ((Tmp[2] & 0xF0) >> 4)];
        strEncode+= EncodeTable[((Tmp[2] & 0x0F) << 2)];
        strEncode+= "=";
    }
    
    return strEncode;
}
 
string ZBase64::Decode(const char* Data,int DataByte,int& OutByte)
{
    //解码表
    const char DecodeTable[] =
    {
        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
        62, // '+'
        0, 0, 0,
        63, // '/'
        52, 53, 54, 55, 56, 57, 58, 59, 60, 61, // '0'-'9'
        0, 0, 0, 0, 0, 0, 0,
        0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,
        13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, // 'A'-'Z'
        0, 0, 0, 0, 0, 0,
        26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38,
        39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, // 'a'-'z'
    };
    //返回值
    string strDecode;
    int nValue;
    int i= 0;
    while (i < DataByte)
    {
        if (*Data != '\r' && *Data!='\n')
        {
            nValue = DecodeTable[*Data++] << 18;
            nValue += DecodeTable[*Data++] << 12;
            strDecode+=(nValue & 0x00FF0000) >> 16;
            OutByte++;
            if (*Data != '=')
            {
                nValue += DecodeTable[*Data++] << 6;
                strDecode+=(nValue & 0x0000FF00) >> 8;
                OutByte++;
                if (*Data != '=')
                {
                    nValue += DecodeTable[*Data++];
                    strDecode+=nValue & 0x000000FF;
                    OutByte++;
                }
            }
            i += 4;
        }
        else// 回车换行,跳过
        {
            Data++;
            i++;
        }
     }
    return strDecode;
}

4.使用示例（结合opencv）

main.cpp

#include<opencv2/opencv.hpp>
#include<iostream>
#include"ZBase64.h"
#include<vector>
 
 
using namespace std;
using namespace cv;
 
void main()
{
	Mat img = imread("1.bmp");
 
	vector<uchar> vecImg;                               //Mat 图片数据转换为vector<uchar>
	vector<int> vecCompression_params;
	vecCompression_params.push_back(CV_IMWRITE_JPEG_QUALITY);
	vecCompression_params.push_back(90);
	imencode(".jpg", img, vecImg, vecCompression_params);
 
	ZBase64 base64;
	string imgbase64 = base64.Encode(vecImg.data(), vecImg.size());     //实现图片的base64编码
 
	cout << imgbase64 << endl;
}

5.效果图      

C++实现图片转base64的示例代码

C++实现图片转base64的示例代码

6.方法补充

除了上文的方法，小编还为大家整理了其他C++实现图片转base64的方法，希望对大家有所帮助

方法一

//++Base64.h

#pragma once

class CBase64
{
public:
public:
    CBase64();
    ~CBase64();

    /*编码
    DataByte
    [in]输入的数据长度,以字节为单位
    */
    std::string Encode(const char* Data, int DataByte);

    /*解码
    DataByte
    [in]输入的数据长度,以字节为单位
    OutByte
    [out]输出的数据长度,以字节为单位,请不要通过返回值计算
    输出数据的长度
    */
    std::string Decode(const char* Data, int DataByte, int& OutByte);

};

//++Base64.cpp
#include"stdafx.h"
#include"Base64.h"

CBase64::CBase64()
{

}

CBase64::~CBase64()
{

}

std::string CBase64::Encode(const char* Data, int DataByte)
{
    //编码表
    const char EncodeTable[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/";
    //返回值
    string strEncode;
    unsigned char Tmp[4] = { 0 };
    int LineLength = 0;
    for (int i = 0; i<(int)(DataByte / 3); i++)
    {
        Tmp[1] = *Data++;
        Tmp[2] = *Data++;
        Tmp[3] = *Data++;
        strEncode += EncodeTable[Tmp[1] >> 2];
        strEncode += EncodeTable[((Tmp[1] << 4) | (Tmp[2] >> 4)) & 0x3F];
        strEncode += EncodeTable[((Tmp[2] << 2) | (Tmp[3] >> 6)) & 0x3F];
        strEncode += EncodeTable[Tmp[3] & 0x3F];
        if (LineLength += 4, LineLength == 76) { strEncode += "\r\n"; LineLength = 0; }
    }
    //对剩余数据进行编码
    int Mod = DataByte % 3;
    if (Mod == 1)
    {
        Tmp[1] = *Data++;
        strEncode += EncodeTable[(Tmp[1] & 0xFC) >> 2];
        strEncode += EncodeTable[((Tmp[1] & 0x03) << 4)];
        strEncode += "==";
    }
    else if (Mod == 2)
    {
        Tmp[1] = *Data++;
        Tmp[2] = *Data++;
        strEncode += EncodeTable[(Tmp[1] & 0xFC) >> 2];
        strEncode += EncodeTable[((Tmp[1] & 0x03) << 4) | ((Tmp[2] & 0xF0) >> 4)];
        strEncode += EncodeTable[((Tmp[2] & 0x0F) << 2)];
        strEncode += "=";
    }

    return strEncode;
}

std::string CBase64::Decode(const char* Data, int DataByte, int& OutByte)
{
    //解码表
    const char DecodeTable[] =
    {
        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
        62, // '+'
        0, 0, 0,
        63, // '/'
        52, 53, 54, 55, 56, 57, 58, 59, 60, 61, // '0'-'9'
        0, 0, 0, 0, 0, 0, 0,
        0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,
        13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, // 'A'-'Z'
        0, 0, 0, 0, 0, 0,
        26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38,
        39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, // 'a'-'z'
    };
    //返回值
    string strDecode;
    int nValue;
    int i = 0;
    while (i < DataByte)
    {
        if (*Data != '\r' && *Data != '\n')
        {
            nValue = DecodeTable[*Data++] << 18;
            nValue += DecodeTable[*Data++] << 12;
            strDecode += (nValue & 0x00FF0000) >> 16;
            OutByte++;
            if (*Data != '=')
            {
                nValue += DecodeTable[*Data++] << 6;
                strDecode += (nValue & 0x0000FF00) >> 8;
                OutByte++;
                if (*Data != '=')
                {
                    nValue += DecodeTable[*Data++];
                    strDecode += nValue & 0x000000FF;
                    OutByte++;
                }
            }
            i += 4;
        }
        else// 回车换行,跳过
        {
            Data++;
            i++;
        }
    }
    return strDecode;
}

以下是读写图片的调用代码：
bool CBusinessDataMgr::ReadPhotoFile(std::basic_string<TCHAR> strFileName,std::string &strData)
{
    HANDLE hFile;
    hFile = CreateFile(strFileName.c_str(), GENERIC_READ, 0, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);

    if (hFile == INVALID_HANDLE_VALUE)
    {
        return false;
    }

    DWORD dFileSize = GetFileSize(hFile, NULL);
    char * pBuffer = new char[dFileSize + 1];

    if(pBuffer == NULL)
        return false;

    memset(pBuffer, 0, dFileSize);

    DWORD dReadSize(0);
    if (!ReadFile(hFile, pBuffer, dFileSize, &dReadSize, NULL))
    {
        delete[]pBuffer;
        CloseHandle(hFile);
        return false;
    }

    CBase64 base64;
    strData = "";
    strData = base64.Encode((const char*)pBuffer, dReadSize);

    delete[]pBuffer;
    CloseHandle(hFile);
    return true;
}

bool CBusinessDataMgr::WritePhotoFile(std::basic_string<TCHAR> strFileName, std::string &strData)
{
    HANDLE hFile;
    hFile = CreateFile(strFileName.c_str(), GENERIC_WRITE, 0, NULL, CREATE_ALWAYS, FILE_ATTRIBUTE_NORMAL, NULL);

    if (hFile == INVALID_HANDLE_VALUE)
    {
        return false;
    }

    CBase64 base64;
    int datalen(0);
    DWORD dwritelen(0);
    std::string strdcode = base64.Decode(strData.data(),strData.size(), datalen);
    if (!WriteFile(hFile, strdcode.data(), datalen, &dwritelen, NULL))
    {
        CloseHandle(hFile);
        return false;
    }
    CloseHandle(hFile);
    return true;
}

方法二

#include <string>
#include <iostream>

static std::string base64Decode(const char* Data, int DataByte) {
    //解码表
    const char DecodeTable[] =
    {
            0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
            0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
            62, // '+'
            0, 0, 0,
            63, // '/'
            52, 53, 54, 55, 56, 57, 58, 59, 60, 61, // '0'-'9'
            0, 0, 0, 0, 0, 0, 0,
            0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12,
            13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, // 'A'-'Z'
            0, 0, 0, 0, 0, 0,
            26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38,
            39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, // 'a'-'z'
    };
    std::string strDecode;
    int nValue;
    int i = 0;
    while (i < DataByte) {
        if (*Data != '\r' && *Data != '\n') {
            nValue = DecodeTable[*Data++] << 18;
            nValue += DecodeTable[*Data++] << 12;
            strDecode += (nValue & 0x00FF0000) >> 16;
            if (*Data != '=') {
                nValue += DecodeTable[*Data++] << 6;
                strDecode += (nValue & 0x0000FF00) >> 8;
                if (*Data != '=') {
                    nValue += DecodeTable[*Data++];
                    strDecode += nValue & 0x000000FF;
                }
            }
            i += 4;
        }
        else {
            Data++;
            i++;
        }
    }
    return strDecode;
}
static const std::string base64_chars =
"ABCDEFGHIJKLMNOPQRSTUVWXYZ"
"abcdefghijklmnopqrstuvwxyz"
"0123456789+/";
std::string base64_encode(const char* bytes_to_encode, unsigned int in_len)
{
    std::string ret;
    int i = 0;
    int j = 0;
    unsigned char char_array_3[3];
    unsigned char char_array_4[4];

    while (in_len--)
    {
        char_array_3[i++] = *(bytes_to_encode++);
        if (i == 3)
        {
            char_array_4[0] = (char_array_3[0] & 0xfc) >> 2;
            char_array_4[1] = ((char_array_3[0] & 0x03) << 4) + ((char_array_3[1] & 0xf0) >> 4);
            char_array_4[2] = ((char_array_3[1] & 0x0f) << 2) + ((char_array_3[2] & 0xc0) >> 6);
            char_array_4[3] = char_array_3[2] & 0x3f;
            for (i = 0; (i < 4); i++)
            {
                ret += base64_chars[char_array_4[i]];
            }
            i = 0;
        }
    }
    if (i)
    {
        for (j = i; j < 3; j++)
        {
            char_array_3[j] = '\0';
        }

        char_array_4[0] = (char_array_3[0] & 0xfc) >> 2;
        char_array_4[1] = ((char_array_3[0] & 0x03) << 4) + ((char_array_3[1] & 0xf0) >> 4);
        char_array_4[2] = ((char_array_3[1] & 0x0f) << 2) + ((char_array_3[2] & 0xc0) >> 6);
        char_array_4[3] = char_array_3[2] & 0x3f;

        for (j = 0; (j < i + 1); j++)
        {
            ret += base64_chars[char_array_4[j]];
        }

        while ((i++ < 3))
        {
            ret += '=';
        }

    }
    return ret;
}
int main(){
    std::fstream f;
    f.open("2.jpeg", std::ios::in | std::ios::binary);
    f.seekg(0, std::ios_base::end);     //设置偏移量至文件结尾
    std::streampos sp = f.tellg();      //获取文件大小
    int size = sp;
    char* buffer = (char*)malloc(sizeof(char) * size);
    f.seekg(0, std::ios_base::beg);     //设置偏移量至文件开头
    f.read(buffer, size);                //将文件内容读入buffer
    std::string imgBase64 = base64_encode(buffer, size);    
    std::string s_mat = base64Decode(imgBase64.c_str(), imgBase64.size());
    FILE* stream;
    if ((stream = fopen("1.JPG", "wb")) != NULL)
    {
        int numwritten = fwrite(s_mat.data(), sizeof(char), s_mat.size(), stream);
        fclose(stream);
    }     //编码
}

声明：本站所有文章，如无特殊说明或标注，均为本站原创发布。任何个人或组织，在未征得本站同意时，禁止复制、盗用、采集、发布本站内容到任何网站、书籍等各类媒体平台。如若本站内容侵犯了原著者的合法权益，可联系我们进行处理。